Advanced Search

High Performance
Sockets & Adapters

March 2010

Thermal and Functional Hybrid Socket for Kyocera's 602PGA

Users can socket their PGA IC's on the target board and run extreme thermal cycling as well as functional high speed test while being able to change chips often

BURNSVILLE, MN - March, 2010 - Ironwood Electronics has recently introduced the new high performance socket for the 602PGA- SS-PGA27/602A-01. The contactor is a spring pin (pogo) with 27 grams actuation force per ball and cycle life of 500,000 insertions. The self inductance of the contactor is 1.1nH with 50 ohm matched impedance. The current capacity of each contactor is 5 amps. Socket temperature range is -55C to +150C. The specific configuration of the package to be tested in the SS-PGA27/602A-01 is Kyocera's PB602AUE63-1 and other PGA ICs that are 35x35mm body size, 1.27mm pitch, 27x27 array. To use, drop IC in part, close clam shell lid, and apply down force using compression screw. The Socket is constructed of aluminum which provides heat sinking up to several watts and custom heat sinks can easily be designed for higher power dissipation. This socket can be used for functional test and extreme thermal cycling test with the most stringent requirements.

Pricing for the SS-PGA27/602A-01 is $7050 at qty 1 with reduced pricing available depending on quantity required.

Elena Smolentseva
11351 Rupp Dr.
Suite 400
Burnsville, MN 55337

Tel: 952-229-8200 or (800) 404-0204
Fax: 952-229-8201

©2019 Ironwood Electronics. All rights reserved. Privacy Policy