Advanced Search





     
High Performance
Sockets & Adapters
1-800-404-0204
info@ironwoodelectronics.com
            

Febuary 2019

75GHz QFN socket for 0.7mm pitch QFN3875 GHz Bandwidth RF Socket for QFN38

Quickly and easily Socket your 10.5x5.5mm, 0.7mm pitch QFN packages on any application board with performance equivalent to direct solder version

EAGAN, MN - February, 2019 - Ironwood Electronics has recently introduced a new QFN socket design using high performance elastomer capable of 75 GHz, very low inductance and wide temperature applications. The GT-QFN-3024 socket is designed for 10.5x5.5 mm package size and operates at bandwidths up to 75 GHz with less than 1dB of insertion loss. The contact resistance is typically 20 milliohms per pin. The socket is mounted on the target PCB with no soldering, and uses very small real estate allowing capacitors/resistors to be placed close by. This socket utilizes clamshell lid with integrated compression mechanism. The socket is constructed with cam actuated lever lid with central opening for direct thermal characterization of silicon. To use, place the device inside the socket, close the clamshell lid by latching and apply downward pressure by turning lever. This socket can be used for hand test and temperature cycling as well as debugging application in development and device characterization.

The GT-QFN-3024 socket is constructed with high performance and low inductance elastomer contactor. The temperature range is -55 C to +160 C. Works with IC's such as QFN38, 10.5x5.5mm with 26 leads in the length side and 6 leads in the width side with split center ground pad and 0.7mm pitch.

Pricing for the GT-QFN-3024 is $630 at qty 1; with reduced pricing available depending on quantity required.

Elena Smolentseva
1335 Eagandale Court
Eagan, MN 55121

Tel: 952-229-8200 or (800) 404-0204
Fax: 952-229-8201
info@ironwoodelectronics.com
www.ironwoodelectronics.com


©2019 Ironwood Electronics. All rights reserved. Privacy Policy