Advanced Search





     
High Performance
Sockets & Adapters
1-800-404-0204
info@ironwoodelectronics.com
          

August 2016

0.5mm pitch BGA spring pin socketSwivel Lid Spring Pin BGA Socket for IDT's wireless power receiver

Socket your 98 pin BGA using Extreme Temperature Socket with Superior Electrical Performance

EAGAN, MN - August, 2016 - Ironwood Electronics recently introduced a new BGA socket addressing high performance requirements for testing BGA devices - SBT-BGA-7033. The contactor is a stamped spring pin with 31 gram actuation force per ball and cycle life of 125,000 insertions. The self inductance of the contactor is 0.88 nH, insertion loss < 1 dB at 15.7 GHz and capacitance 0.097pF. The current capacity of each contactor is 4 amps at 30C temperature rise. Socket temperature range is -55C to +180C. Socket also features a floating guide for precise ball to pin alignment. The specific configuration of the package to be tested in the SBT-BGA-7033 is IDT's wireless power receiver chip (BGA, 4x7.5mm, 0.5mm pitch, 98 position, 7x14 ball array) used to wirelessly charge Galaxy S7. The socket is mounted using supplied hardware on the target PCB with no soldering. To use, place the BGA device into the socket base and swivel socket lid on to the base using the shoulder screws. The socket uses a compression screw to apply downward pressure enabling the device be interconnected to the target PCB. This socket can be used for hand test and characterization applications with the most stringent requirements.

Pricing for the SBT-BGA-7033 is $491 at qty 1 with reduced pricing available depending on quantity required.

Elena Smolentseva
1335 Eagandale Court
Eagan, MN 55121

Tel: 952-229-8200 or (800) 404-0204
Fax: 952-229-8201
info@ironwoodelectronics.com
www.ironwoodelectronics.com


©2017 Ironwood Electronics. All rights reserved.