Advanced Search





     
High Performance
Sockets & Adapters
1-800-404-0204
info@ironwoodelectronics.com
          

February 2005

Probing Adapters for 32 and 48 Pin MLF

Users can Connect Logic Analyzer and Scopes to MLF (QFN) IC's and Test Boards With MLF (QFN) IC's In-Circuit

BURNSVILLE, MN - February, 2005 - Ironwood Electronics' new high performance Probing Adapters CA-MLF32A-A-01 and CA-MLF48A-A-01 allow probing of 32 and 48 pin MLF's (QFN) with logic analyzers such as the Agilent 167XX or Tektronix TLA7XX. These adapters are compatible with Cypress Microsystems CY8XXXXX PSOC IC's or other chips in 32 and 48 pin MLF (QFN) with 0.5mm pitch. The SMT foot is simply soldered to the same pads as for the IC using standard soldering methods. The compatible MLF (QFN) SMT socket adapter foot is available separately such that many boards can be instrumented by moving the probing adapter between PCB's. The IC is installed into the ZIF socket on the probing board. The Probe Board is connected to the PCB attached SMT foot with a male to male pin adapter. Both the Probe Board and the SMT Socket Adapter have gold plated Machined Pins and the male to male adapter is also gold plated for highest reliability. These patent pending adapters are available immediately.

Pricing for the Probing Adapters CA-MLF32A-A-01 and CA-MLF48A-A-01 is as low as $469 each at quantity 100.

Ranjit Patil
11351 Rupp Dr.
Suite 400
Burnsville, MN 55337

Tel: 952-229-8200 or (800) 404-0204
Fax: 952-229-8201
info@ironwoodelectronics.com
www.ironwoodelectronics.com


©2017 Ironwood Electronics. All rights reserved.