Advanced Search





     
High Performance
Sockets & Adapters
1-800-404-0204
info@ironwoodelectronics.com
          

February 2015

75GHz BGA socket for 1mm pitch BGA57275GHz Clamshell BGA Socket with Heat Sink Lid

Quickly and easily Socket your 25x25mm, 1mm pitch BGA packages on any application board with performance equivalent to direct solder version

EAGAN, MN - February, 2015 - Ironwood Electronics has recently introduced a new BGA socket design using high performance elastomer capable of 75GHz, very low inductance and wide temperature applications. The GT-BGA-2019 socket is designed for 25x25 mm package size and operates at bandwidths up to 75GHz with less than 1dB of insertion loss. The socket is designed to dissipate 7 watts using compression screw with heat sink fins and can be customized up to 100 watts with modified fin design on top of the screw and adding axial flow fan. The contact resistance is typically 30 milliohms per pin. The socket is mounted on the target PCB with no soldering, and uses very small real estate allowing capacitors/resistors to be placed close by. Other passive components can be placed on the back side of PCB by creating custom cutouts in the stiffener plate. The socket is constructed with clamshell lid which incorporates a quick insertion method so that IC’s can be changed out quickly. To use, place the device inside the socket, close the lid by latching and apply downward pressure by turning heat sink compression screw.

The GT-BGA-2019 socket is constructed with high performance and low inductance elastomer contactor. The temperature range is -55 C to +160 C. Works with IC's such as BGA, 25x25mm with 24x24 array and 1mm pitch.

Pricing for the GT-BGA-2019 is $909 at qty 1; with reduced pricing available depending on quantity required.

Sue Huang
1335 Eagandale Court
Eagan, MN 55121

Tel: 952-229-8200 or (800) 404-0204
Fax: 952-229-8201
info@ironwoodelectronics.com
www.ironwoodelectronics.com


©2017 Ironwood Electronics. All rights reserved.